Free delivery on orders of ₹4,999 or more|Launch OfferOnly 100 packs left — S 500 Surface Track + 2× S91 + Fast USB₹21,668₹10,400.40Grab yours →|CE & FCC Certified · 8000W / 32A · Child-Safe|HurryOffer ends when stock runs out — don't miss itFree delivery on orders of ₹4,999 or more|Launch OfferOnly 100 packs left — S 500 Surface Track + 2× S91 + Fast USB₹21,668₹10,400.40Grab yours →|CE & FCC Certified · 8000W / 32A · Child-Safe|HurryOffer ends when stock runs out — don't miss it

SAGA S Series

Surface Power Track Sockets

Surface power track sockets screw onto a wall, backsplash or desk, so nothing is cut into your furniture or stone. Pick the 500 mm S 500 for up to 5 movable sockets or the 1000 mm S 1000 for up to 10.

Buying guide

How to choose a surface power track

500 mm or 1000 mm

The S 500 is 500 mm long and holds up to 5 adaptor modules. The S 1000 is 1000 mm long and holds up to 10. Modules sit on 100 mm centres, and both tracks are 86 mm wide and stand 19 mm above the surface they are fixed to.

Both lengths carry the same rating: 250 V AC, 32 A, 8,000 W maximum continuous load across the whole track. The longer track gives you more socket positions, not more total load. Measure the clear run you have, then choose the 500 mm track for a single desk or a short stretch of counter and the 1000 mm track for a long counter or a shared worktable.

Where a surface track fits

A surface track suits the wall above a kitchen counter, the underside of wall cabinets, the back edge of a desk and the wall above a workbench. The S Series has a motion-activated LED strip along the track, which helps light the counter or desk below it.

The tracks are IP20 and made for dry indoor use. In a kitchen, mount the track away from the sink and the hob splash zone, and do not use it in bathrooms or outdoors. For room-by-room advice see power track sockets for kitchens and for the home.

What comes in the box and what to add

Each track comes with a mounting hardware kit (M4/M5 screws and end brackets), a wiring and installation guide and a warranty card. Adaptor modules are not included with a track on this page: add adaptor modules to match the plugs on your appliances, or buy a combo that pairs a track with modules.

Installation is a job for a qualified electrician: a dedicated circuit with a 32 A Type B/C MCB and a 30 mA RCCB upstream, and 4.0 mm² copper cable if you want the full 32 A. The installation guide lists the steps.

S 500 and S 1000 compared
S 500S 1000
Track length500 mm1000 mm
Adaptor modulesUp to 5Up to 10
Track width86 mm86 mm
Height above surface19 mm19 mm
Rating250 V AC · 32 A · 8,000 W250 V AC · 32 A · 8,000 W
LightingMotion-activated LED stripMotion-activated LED strip
WeightAbout 1.2 kgAbout 2.0 kg
Protection ratingIP20, dry indoor useIP20, dry indoor use

Support

Frequently asked questions

Common questions about surface power track sockets.

Up to 5 adaptor modules fit on the 500 mm S 500, and up to 10 on the 1000 mm S 1000. Modules sit on 100 mm centres and can be moved along the track without tools.

The track itself does not. It is fixed on top of the wall, backsplash or desk with the supplied M4/M5 screws and end brackets, with no cutout. A supply cable still has to reach one end of the track, and your electrician decides how to route it.

No. SAGA surface tracks come in factory lengths of 500 mm and 1000 mm and are not made to be cut on site. Choose the length that fits your run, and contact us if a project needs something different.

Yes. Every SAGA power track must be installed by a qualified electrician on a dedicated circuit with a 32 A Type B/C MCB and a 30 mA RCCB upstream. The track has no built-in overcurrent protection.

Not with the S 500 and S 1000 tracks listed on this page. The box holds the track, a mounting hardware kit, the installation guide and a warranty card. Buy adaptor modules separately or choose a combo that includes them.

Mount it away from the sink and the hob splash zone. The track is rated IP20, which means it is built for dry indoor locations only.